Schacht Spinning Wheels

Quantity  
Schacht Ladybug - $550.00 Lazy Kate for Ladybug - $34.95
 
Schacht Matchless Spinning Wheels

are the most responsive spinning wheel available today.  Whether you choose single treadle or double treadle action, you'll appreciate the  wheels' matchless capabilities. The Schacht Spinning Wheel offers double drive, Scotch tension, and bobbin lead modes of operation.  Wheels come with two flyer whorls; five other flyer whorls offer spinning ratios from 4:1 to 27.5:1. The 19 1/2" drive wheel and flyer shaft are supported by self-aligning bronze bearings for precise action.  Each flyer is individually balanced and the bobbins and flyer whorls are trued on center for long and superior service. Also included are three bobbins, a tensioned lazy kate, threading hook and instructions. Maple constructions with walnut accents. The Schacht spinning wheel is almost fully assembled, just pop in the treadle are you are done!

Schacht Spinning Wheel Care

Schacht Spinning Wheel Cart

This is the neatest way to travel with your Schacht Matchless wheel.  We've used special hardware in the spinning wheel legs for quick attachment and removal of rubber wheels. A wooden block inserted under the tension

Schacht Bobbins

Schacht Whorls

The type of fiber you are spinning and the kind of yarn you want to produce will determine which flyer whorl to use. Choosing a compatible whorl for the task at hand will go a long way in helping you comfortably create the yarn you want. Your spinning wheel comes with two flyer whorls: a Medium Speed Whorl with 9:1 and 11:1 ratios and a Fast Speed Whorl with 13:1 and 15 1/2:1 ratios. We offer five others, which are specified in the chart below. The general rules to remember are: the larger (slower) the whorl, the thicker the yarn, the less the twist, and the greater the take-up. It is also important to remember that, in the double drive mode, depending on how much or how little tension you put on the drive band, you can increase or decrease the take up. In the Scotch Tension mode the amount of take-up is controlled by the amount of tension you put on the brake spring & cord. The greater the tension, the greater the take-up.