Schacht Weaving Looms
Standard
Floor Weaving Looms
Schacht
Standard floor loom comes in two styles: The Standard Low Castle and
The Standard High Castle. Though both looms take up identical floor space,
the lower profile of the Low Castle model appears visually smaller.
A High Castle loom includes a storage tray and holes drilled in the top of
the castle uprights for the swivel pin of an extension lamp, otherwise the
looms function the same. Both the Standard Low Castle and the
Standard High Castle Schacht looms are available in 36" and 46"
wide weaving widths. Shown above: Maple Standard
High castle Loom with double back beam.
All Standard Schacht weaving looms may be
ordered with eight or Four Now-Four Later shaft options. The number of
shafts you choose will depend on the kind of weaving you intend to do.
Though most weave structures can be woven on four shafts, additional
shafts will increase your pattern option extensively.
The Schacht Standard weaving loom has an underslung jack mechanism to raise the shafts. The jacks pivot from two
points equidistant from the center and lift the shafts by pushing up on
the center point. Schacht employs a parallel lamm system which gives
our looms a light treadling action. Because of this parallel lamm,
it isn't necessary to adjust the tie-up cords. Shown
to right: Cherry Standard High Castle 8 Harness Loom
The
Schacht tie-up system is quick and easy to use. Premeasured nylon tie-up
cords hang from the lamms and are attached to a treadle by sliding the
appropriate cords into the treadle slot. This makes changing tie-ups
very fast.
Other special features of the Schacht
Standard floor looms include: friction reducing aluminum shaft channels, a
back beam which folds with or without a warp on the loom, removable back
and breast beams, and an adjustable open-sided beater. The Schacht
braking system employs a ratchet and dog on the cloth beam and a friction
brake on the warp beam. This combination give you precise tension control
at all times. All
Schacht Standard looms come complete with your choice of reed (please
choose below), flat steel heddles, , one 11" boat shuttle with
bobbin, reed hook and lease sticks. Inserted eye heddles or Texsolv nylon
string heddles may be substituted for a small additional charge. Shown above: Schacht Standard Low
Castle Loom with lamp accessory.
Reed for Standard Loom
Please choose one when purchasing above loom. This
is part of the loom above and FREE when purchasing a Schacht loom. Extra reeds
can be purchased further down the page.
A word about delivery
FREE shipping on all Schacht floor weaving
looms!
With the exception of the Wolf Pup, all Schacht Wolf looms will be
shipped by freight to your home. You will be notified in advance of the
delivery day of your weaving loom. You will have to arrange for someone to
transport the loom off the truck and into your home. (The delivery driver
will do this only at an extra charge. If necessary you can arrange this
with us). Please note that there is a shipping surcharge for weaving looms
shipped to Alaska and Hawaii.
Schacht Sectional
Beam for Standard Weaving Loom
Sectional warp beams are available for the
Schacht floor looms. The Schacht sectional beams are easily
assembled and can be installed on the existing warp beam of your Schacht
loom at any time. Sectional beams for Standard Schacht floor looms have
2" sections and a one half yard circumference. They are available in
maple or cherry with maple pegs. Please note your loom serial
number when ordering.
Double Back Beams
facilitate the different warp
tensions for weave structures such as warp pile, supplementary warp, and
Bedford cord. Installation is straight-forward; holes have been
predrilled in the loom for easy assembly. Please
supply us with the serial number of your loom when ordering.
Schacht Standard Loom
Specifications
| Weaving
Width |
36" |
46" |
| Overall
Width |
44" |
53" |
| Height-Breast
Beam |
32" |
32" |
| Height-Low
Castle |
37" |
37" |
| Height-High
Castle |
46" |
46" |
| Depth-Open |
38" |
38" |
| Depth-Folded |
26" |
26" |
| Weight-8-Shaft |
125
lb |
141
lb |
| Weight-4
Now-4 Later |
110
lb |
125
lb |
| Weight-High
Castle |
add
10 lb |
|
| Weight-Shipping |
add
27 lb |
|
| Weight-4
Later Kit |
15
lb |
16
lb |
| Heddles-8
Shaft |
1000 |
1000 |
| Heddles 4
Now-4 Later |
1000 |
1000 |
| STANDARD
FLOOR LOOM ACCESSORIES |
| 36"
Double Back Beam |
|
19
lb |
| 46"
Double Back Beam |
|
22
lb |
| 36"
Sectional Beam |
9" x 3" x 2" |
7
lb |
| 46"
Sectional Beam |
8"
x 3" x 2" |
9
lb |
| Raddle
for up to 26" |
29
1/2" x 3" x 1" |
1
1/2 lb |
| Raddle
for up to 40" |
44
1/2" x 3" x 1 1/2" |
2
1/2 lb |
| Raddle
for up to 48" |
52
1/2" x 3" x 1 1/2" |
3
lb |
| Lamp
Holder |
4
1/2" x 2 1/2" x 1 1/4" |
8
oz |
| REEDS
AND HEDDLES |
| 36"
& 46" Reeds |
Total
Length: 1" longer than weaving width
Total Height: 5" |
| Flat
Steel Heddle |
9"
from center of eye to center of eye-9/16" eye |
| Inserted
Eye Heddle |
9"
from center of eye to center of eye-1/4" eye |
| Texsolv
String Heddle |
9
3/8" end to end-1/2" eye |
Schacht Loo m
Bench
The Schacht loom bench is a beautiful companion piece to our Wolf looms
and Standard floor looms. The bench seat height is adjustable from
19" to 24" and has been designed to offer you both a flat and a
slanted seat position. Optional bag for bench hold shuttles and yarn.
Weaving Yarn
Spinning Books
Knitting Books
|